Replace aging roofing and improve insulation with panels selected for your commercial or industrial building.
Insulated metal panels
Insulated metal panels combine an external metal face, insulation and an internal lining in a factory-made panel. They can replace an aging roof while improving insulation and the finish inside a commercial or industrial building.
We install and refurbish insulated panel roofs in Texas. We look at the existing supports, roof shape and use of the space below before recommending a panel and planning the replacement work.
Commercial Roofing Services
An uninsulated roof can leave a building difficult to heat or cool. When the covering also needs replacing, insulated panels offer a way to tackle both jobs together. The new roof must be designed for the existing structure; changing to an insulated panel is more involved than exchanging one sheet for another.
Leaks can begin at panel joints, fasteners, roof openings or damaged flashings. We inspect those details and the neighboring panels to decide whether a local repair is practical. If water has entered the panel or the metal faces have deteriorated, replacing the affected panels may be needed.
Panel thickness is only part of the insulation decision. Gaps at joints, roof edges and service openings can interrupt the insulated layer. We consider those connections alongside the indoor temperature and moisture conditions so the new panels work with the rest of the building.
We can include insulated panels in a roof project or a wider roof and wall refurbishment.
Remove deteriorated roofing and install insulated roof panels, with new flashings and connections to suit the building.
Investigate leaks at panel joints, fasteners and openings, then repair or replace the affected components.
Compare panel options when a roof replacement also needs to improve the thermal performance of the occupied space.
Include insulated wall panels where the refurbishment extends to the building exterior, with roof-to-wall connections considered together.
Roof panels and wall panels are made for different applications. The roof slope, support spacing and required loads determine which roof products can be used. The internal lining and joint details also need to suit the space below, particularly in temperature-controlled or humid buildings.
Skylights, vents and equipment curbs interrupt the panel layout. We plan these connections before ordering panels, including any work the equipment contractor needs to complete. A new panel roof should not leave an old, leaking curb as its weakest detail.
Long panels need room for delivery, lifting and handling. We agree the work areas and sequence with your site team, including protection below areas being opened. If a production area or loading route needs to close temporarily, that is part of the discussion before work starts.
Let us know about planned equipment, a change of tenant or a change in indoor temperature requirements. It is easier to account for these while planning the roof than to modify new panels after installation.
Talk to our team
Contact our Texas office with your property address and the roof problem or refurbishment you are planning. Existing drawings and photographs are helpful if you have them.
Frequently asked questions
A factory-made panel with an insulating core bonded between metal faces. The specific product determines its intended roof or wall application.
Not unless it is designed for that use. Roof slope, loads, support spacing and joint details must suit the selected roof panel.
No. The choice depends on whether damage affects the finish, metal face, core or joint and whether a suitable repair can restore the affected component.
Identify profile, cover width, thickness, joint geometry and finish using records, labels and measurements. Thickness alone is not enough.
Air leakage through joints or openings can bring moisture to cold surfaces. Indoor conditions and seal continuity need consideration alongside insulation.
It depends on the joint arrangement and installation sequence. Adjacent panels or trim may need to be released and reconnected.
The work may need isolation and temporary enclosure below. Removing a panel opens the building envelope and can affect temperature and humidity.
They need to be identified in the installation proposal. Long panels require suitable handling and adequate access at the site.
No. Joints, supports, openings and other components affect the finished assembly alongside the panel's own published values.
Send the address, project type and available drawings or photos. State whether the need is new installation, replacement or investigation of a leak.
Our business grew through roof and cladding refurbishment in the UK. That experience shapes the work we now offer from our Texas office.
We investigate the roof problem and explain what can be repaired, restored or replaced, so you can decide how to invest in the building.
We can coordinate roof, insulation, wall panel and drainage work, including the connections where separate repairs can leave problems behind.
We agree access, work areas and protection with your site team, including any restrictions needed while the roof is opened.
Roofing and cladding systems
Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.
We review the affected areas and discuss how you use the building and what you want the work to achieve.
Your quotation explains the proposed repairs or refurbishment, the areas included and the price.
We discuss timing, access, deliveries and protection with your site contact before work begins.
We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.
We review the completed work and provide the care information and documents included in your project.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, assist in our marketing efforts, and for personalised advertising.
