Retail Center and Big Box Store Roofing in San Antonio and Austin

Retail Center and Big Box Store Roofing in San Antonio and Austin

We install TPO roofs, metal retrofit roofs and protective coatings on big box stores, retail centers and shopping properties in San Antonio and Austin. We plan the work around customers, tenants and deliveries, and choose the roof that ends the leaks putting stock and trading areas at risk.

Walkway along a flat roof edge beside guardrails and rooftop equipment

Leaks in an open store

A leaking roof can affect a sales area, stockroom or entrance. Tell us where water appears and when it happens. We inspect the roof and nearby drainage or equipment connections to identify the likely cause.

Roofing above several tenants

One roof can cover several units with different opening hours and site contacts. We agree who needs updates and which areas are affected, including access through shared service yards and loading areas.

Recovering or replacing the roof

Big box roofs are mostly wide low-slope areas. When the insulation is dry and the deck sound, a TPO recover over the existing roof keeps tear-off noise and debris away from the sales floor; wet insulation means the old layers come off for a full TPO replacement. Metal-roofed stores with sound structure suit a retrofit roof over the old panels.

Retail roofing work we can help with

TPO roofing

New TPO, replacement and recover on big box and strip center roofs, with a white surface that reflects heat away from a large air-conditioned sales floor.

Metal roof retrofit

A new metal roof on sub-purlins over an aging metal store roof, phased around trading hours.

Protective coatings

Clean, treat and coat sound metal roofs and canopies where rust and cut-edge corrosion are spreading.

R-panel and insulated panels

R-panel for stockrooms and service buildings, and insulated metal panels where a store adds cold rooms or conditioned storage. See R-panel roofing and insulated metal panels.

Gutters and roof openings

Address drainage, skylights and equipment connections as part of the project.

Keeping customer routes clear

Work near entrances, parking or pedestrian routes needs planned separation. We discuss delivery and lifting locations with the property team before starting, including any temporary restrictions.

Rooftop equipment and air intakes

Retail roofs often carry HVAC and kitchen equipment. We coordinate roof access and connections with the relevant contractors, and consider nearby air intakes when planning preparation and coating work.

Preparing a unit for its next tenant

A vacant unit or refurbishment period can be a useful time for larger roof work. We can review the roof alongside planned equipment and cladding changes before the new occupation begins.

Discuss Your Project

Frequently asked questions

Retail Park And Big-box Roofing FAQs

Can our store stay open while the roof is replaced?

In most cases, yes. We phase the roof around trading hours, keep work away from entrances while customers are arriving, and agree crane and delivery times with the store manager. Areas above the sales floor are protected before any roof opening is made.

Is a TPO recover suitable for a big box store roof?

Often. When the existing roof is a single layer over dry insulation and the deck is sound, a TPO recover avoids tear-off debris and noise above the sales floor. Wet insulation or several old layers mean a full TPO replacement instead.

How does a white TPO roof help a large store in summer?

A white membrane reflects much of the sunlight that a dark roof would absorb, so less heat passes into the store and the air-conditioning has less to remove. On a large single-story building, the roof is the biggest surface facing the sun.

How do you keep customers safe near entrances and parking?

We fence off crane and loading areas, route materials away from customer entrances and walkways, and schedule lifts for quiet trading periods or before opening. The property team sees the plan before work starts.

Who approves roof work on a multi-tenant retail center?

Usually the owner or property manager, but leases can give tenants a say over their part of the roof or their trading hours. We agree one approval route at the start and keep each affected tenant informed through the property manager.

Can deliveries to the store continue during the work?

Yes. We agree delivery windows with the store and service yard, keep our own deliveries and crane lifts outside them, and keep loading docks and service doors clear.

What happens to rooftop HVAC and kitchen equipment?

We coordinate with the mechanical and kitchen equipment contractors, raise or reflash curbs as part of the new roof, and plan coating or adhesive work away from air intakes and exhaust outlets. The units stay serviceable throughout.

Our store has a metal roof. Do we need a full tear-off?

Rarely. If the structure is sound, a metal roof retrofit fixes new sub-purlins over the old roof and carries a new metal roof above it, so the store stays covered and trading below. Sound metal with surface rust may only need a protective coating.

Is a vacant unit a good time for roof work?

Yes. With no customers or stock below, crews can open larger areas and finish sooner, and any new equipment, skylights or insulation the next tenant needs can be built into the roof at the same time.

Do you work on retail centers in New Braunfels and Kyle?

Yes. New Braunfels falls within our San Antonio area and Kyle within our Austin area, both on the I-35 corridor. Send the center's address, the affected units and their trading hours to start.

UK refurbishment experience, a Texas office

Refurbishment specialists

Our business grew through roof and cladding refurbishment in the UK. That experience shapes the work we now offer from our Texas office.

Repair what can be retained

We investigate the roof problem and explain what can be repaired, restored or replaced, so you can decide how to invest in the building.

Roofing and cladding together

We can coordinate roof, insulation, wall panel and drainage work, including the connections where separate repairs can leave problems behind.

A plan for your working building

We agree access, work areas and protection with your site team, including any restrictions needed while the roof is opened.

Roofing and cladding systems

Roofing systems and materials for Texas facilities

Rustoleum Logo
Sika Logo
Kingspan Logo
Morin Logo
American WeatherStar Logo
GAF Logo
TAMKO Logo
PAC-CLAD Logo
1

Tell us about the building

Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.

2

Arrange a site visit

We review the affected areas and discuss how you use the building and what you want the work to achieve.

3

Review the quotation

Your quotation explains the proposed repairs or refurbishment, the areas included and the price.

4

Agree the work plan

We discuss timing, access, deliveries and protection with your site contact before work begins.

5

Complete the work

We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.

6

Handover

We review the completed work and provide the care information and documents included in your project.