Commercial Roofing in Cedar Park, TX

Renewing retail, office, medical and flex buildings on US 183

Roofing Contractors Association of Texas member

Roofs, walls and coatings

Tired buildings, renewed properly

In Cedar Park, our commercial roofing and cladding work covers retail centers, office and medical buildings, and the warehouses and flex buildings near the 183A Toll Road. Much of the work here is renewal: metal walls and roofs that still keep the weather out but have faded, streaked and started to look their age.

From our office in Bulverde, a typical trip to Cedar Park takes about an hour and 40 minutes. We survey first, then recommend the lightest work that solves the problem properly, whether that means a coating, new wall panels or a new roof framed over the old one.

Aerial view of profiled metal roofing on an industrial unit — TCR group project example. Industrial metal roof from our roof-over project archive.

Commercial Roofing Services

More Ways We Can Help

Bell Boulevard, 183A and the buildings between

Most of Cedar Park is in Williamson County, a sliver reaches into Travis County, and US 183 cuts through the city from south to north. Inside the city, US 183 runs as Bell Boulevard, a commercial corridor of shops, offices and service buildings. The 183A Toll Road runs parallel as a bypass, retail centers cluster at interchanges such as Whitestone Boulevard, and new warehouse buildings are planned beside the toll road.

Each of those building types asks something different of the envelope. A retail center needs a clean frontage and safe entrances. Medical and professional offices need quiet, dry interiors. Flex and warehouse buildings need roofs and walls that handle heat and hail without constant attention.

Tired metal, sound structure

A metal-clad building can look worn out long before it stops working. The paint chalks, rust streaks run down from fasteners and cut edges, and the faded elevation is usually the one facing the road. For a store or an office that depends on visitors, that matters as much as a drip from the ceiling.

We separate what is cosmetic from what is structural. If the panels and purlins are sound, a coating or new wall panels renew the building with far less upheaval than a new roof. If panels are perforated or water gets in at lap after lap, we look at a metal roof retrofit instead.

Heat, UV and spring hail

Cedar Park gets the full Central Texas mix: long hot summers, strong UV and spring storms. Hail is a regular part of that spring weather, and it dents panels, cracks aging finishes and works fasteners loose. Dents and cracked finishes limit what a coating can do, so the survey checks the panel surface before we recommend one, and we talk through heavier panels for the most exposed roofs and walls.

Summer sun does slower damage. UV chalks paint, dries out sealant at laps and fasteners, and fades the sunniest walls first. We choose finishes and sealants for that exposure, not only for their color.

Four ways to renew the envelope

Retrofit When Coating Is Not Enough

Metal Roof Retrofit: when an old metal or low-slope roof is past coating, we frame a new metal roof over it on sub-purlins, add insulation in the new depth and leave the old roof in place while tenants carry on below.

TPO for Retail and Office Roofs

TPO Roofing: for flat roofs over retail centers and offices, we install white TPO on bare decks, in place of a failed roof or as a recover over a sound one, heat-welding every seam and detailing around crowded rooftop units.

R-Panel in a Fresh Color

R-Panel Roofs and Walls: new R-panel or PBR sheets for walls and roofs in a fresh color, from MBCI, Morin or our own specification R-panel systems, fitted with new trims so a faded building looks finished again.

Insulated Panels for Offices and Clinics

Insulated Metal Panels: Kingspan and AWIP panels for offices, clinics and conditioned flex space, giving a flat, modern wall face and continuous insulation in a single installed layer.

Coatings that restore color and protect steel

On a Cedar Park storefront or office, a protective coating for metal roofs and cladding does two jobs at once. It renews a faded, chalky finish in a color you choose, and it seals the rusting fasteners, laps and cut edges that would otherwise keep getting worse. Both American WeatherStar and Sika have certified us to apply their coating systems.

Preparation decides whether a coating holds, so most of our time goes into washing, rust treatment and edge sealing before the main coat goes on. Our roof coatings page for the Austin area explains the survey and the adhesion checks in more detail.

Recladding walls with R-panel

Sometimes the roof is fine and the walls are the problem: dented by carts and trucks, faded on the sunny side or patched in three different colors. We replace wall panels one elevation at a time, matching the rib profile at corners and openings, or reclad the whole building in a new color with new base trims, corner trims and head flashings.

MBCI and Morin have certified us to install their panels, and we also offer our own specification R-panel systems. See R-panel roofing and walls in Austin for profiles, gauges and insulation choices.

Open for business during the work

Shoppers, patients and office tenants keep coming while the building is renewed. We agree work zones, crane and delivery times and covered walkways with the property manager, keep fire lanes and parking clear, and schedule the noisiest work above clinics and offices for agreed hours.

Owners with buildings in neighboring towns get the same planning, from commercial roofing in Round Rock on I-35 to industrial retrofits on our Georgetown commercial roofing page.

Plan your Cedar Park survey

Start by sending the address, pictures of every elevation and the roof, any drawings and a note on what bothers you most, whether that is leaks, rust or the look of the building. We walk the building and set out what we recommend and why. For our full range of services around the city, see commercial roofing in the Austin area.

Renew your Cedar Park building

Call (210) 775-0995 or send the address, roof and wall photos through our project inquiry form.

Frequently asked questions

Commercial Roofing in Cedar Park, TX FAQs

Do you work on retail centers and office buildings in Cedar Park?

Yes. Retail centers, professional and medical offices, flex buildings and warehouses are all part of our work in Cedar Park. We handle the roof and the wall cladding, and we plan each job around the customers, patients and tenants who keep using the building.

Our metal walls have faded and streaked with rust. Do they need replacing?

Not always. If the panels are solid, a coating renews the color and seals the rusting fasteners and cut edges. If panels are dented, perforated or patched in mismatched colors, new R-panel wall cladding gives a cleaner result. We decide after looking at each elevation.

Can you reclad the walls without touching the roof?

Yes. Walls and roof can be separate scopes. We replace wall panels with new trims and flashings, and we check the eave where wall meets roof so the new cladding does not let water in at the top.

Is a coating worth it on an older Cedar Park roof?

It is when the steel underneath is sound and the trouble is surface rust, chalking and tired fasteners. It is not when panels have rusted through or the insulation below is wet. In those cases we recommend a retrofit or new panels and explain why.

Can you renew only the side of the building that faces the road?

Yes. Walls can be coated or reclad one elevation at a time. We match the rib profile and trims at the corners so the new face ties into the old ones, and we tell you if the other sides are not far behind.

We need commercial roofers near me in Cedar Park. Do you cover the whole city?

Yes. We cover commercial buildings on both sides of US 183 and along the 183A Toll Road, including the part of Cedar Park that falls in Travis County. Tell us where the building is, attach some pictures, and we will set a date to walk it with you.

Can our store or clinic stay open while you work?

Yes. Before we start, your property manager signs off our work areas, crane and delivery slots and the covered routes visitors will use. Work above entrances and sensitive rooms happens at agreed times, so customers and patients can keep using the building.

What do you do with a flat retail roof crowded with rooftop units?

We install TPO, as a new roof, a replacement or a recover over a sound existing roof. Every seam is heat-welded, and each curb and penetration gets its own flashing detail, because that is where crowded retail roofs usually let water in.

Which manufacturers' systems do you use on Cedar Park buildings?

For recladding, MBCI and Morin panels or our own specification R-panel systems. For coatings, American WeatherStar and Sika. For insulated walls, Kingspan and AWIP. We are a certified installer for each of those six brands.

How do we book a survey of our Cedar Park building?

Send the address, pictures of the roof and each side of the building, any drawings and a line or two on the problem, whether that is leaks, rust or a tired look. Email them to info@totalcladdingandroofing.com or phone (210) 775-0995 to book a visit.

UK refurbishment experience, a Texas office

Metal roof retrofit

A new metal roof above a suitable existing covering, with subframing, insulation and details considered together.

TPO roofing

New TPO roof systems, TPO roof replacement and TPO recover for warehouses, retail, offices and industrial buildings.

R-panel and insulated panels

R-panel roofing and wall cladding, and insulated metal panels for roofs and walls on new builds and refurbishments.

Protective metal coatings

Preparation, rust and cut-edge treatment, and compatible protective finishes for metal roofs and cladding.

Roofing and cladding systems

Roofing systems and materials for Texas facilities

Tell us about the building

Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.

Arrange a site visit

We review the affected areas and discuss how you use the building and what you want the work to achieve.

Review the quotation

Your quotation explains the proposed metal roof or cladding work, the areas included and the price.

Agree the work plan

We discuss timing, access, deliveries and protection with your site contact before work begins.

Complete the work

We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.

Handover

We review the completed work and provide the care information and documents included in your project.