Project review and quoting for AWIP insulated roof, wall, roof-deck, controlled-environment, repair, replacement, and installation work.
Insulated commercial and controlled-environment panels
All Weather Insulated Panels (AWIP) manufactures insulated metal panels for roof and wall applications. Total Cladding and Roofing can discuss Texas installation and replacement projects using a specified AWIP panel assembly.
An insulated panel joins a metal exterior, insulation core and interior face in one unit. The joints and connections between those units are essential to the finished enclosure.
Related Services
The panel needs to be intended for its location and supported at the required spacing. Roof slope, loads, openings and indoor conditions affect selection. A wall panel of the same thickness is not automatically a substitute for a roof panel.
Air leakage at a joint or opening can bring moisture into an assembly even when the panel face is intact. For refrigerated or conditioned spaces, the seals and transitions need to suit the temperature and humidity conditions. These requirements are coordinated with the building’s design team.
The repair depends on whether damage affects only the finish or also the metal face, core or joint. Matching an existing panel requires its profile and joint dimensions as well as thickness. Removing one panel may involve releasing adjacent joints and trim.
Long panels need handling that avoids damage to their edges and faces. On an occupied building, removal also creates an opening through the enclosure. Lifting access, temporary protection and the amount opened at one time affect the work sequence.
Use current AWIP product information to confirm the specified panel. Send drawings showing support spacing, openings and the roof or wall area. For refurbishment, photographs and existing product records help identify what must connect to the new work.
Talk to our team
Contact TCR with the property address and whether you need a new installation, replacement or leak assessment. We can discuss the field information needed to price the work.
Frequently asked questions
A factory-made panel with an insulating core bonded between metal faces. The specific product determines its intended roof or wall application.
Not unless it is designed for that use. Roof slope, loads, support spacing and joint details must suit the selected roof panel.
No. The choice depends on whether damage affects the finish, metal face, core or joint and whether a suitable repair can restore the affected component.
Identify profile, cover width, thickness, joint geometry and finish using records, labels and measurements. Thickness alone is not enough.
Air leakage through joints or openings can bring moisture to cold surfaces. Indoor conditions and seal continuity need consideration alongside insulation.
It depends on the joint arrangement and installation sequence. Adjacent panels or trim may need to be released and reconnected.
The work may need isolation and temporary enclosure below. Removing a panel opens the building envelope and can affect temperature and humidity.
They need to be identified in the installation proposal. Long panels require suitable handling and adequate access at the site.
No. Joints, supports, openings and other components affect the finished assembly alongside the panel's own published values.
Send the address, project type and available drawings or photos. State whether the need is new installation, replacement or investigation of a leak.
Our business grew through roof and cladding refurbishment in the UK. That experience shapes the work we now offer from our Texas office.
We investigate the roof problem and explain what can be repaired, restored or replaced, so you can decide how to invest in the building.
We can coordinate roof, insulation, wall panel and drainage work, including the connections where separate repairs can leave problems behind.
We agree access, work areas and protection with your site team, including any restrictions needed while the roof is opened.
Roofing and cladding systems
Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.
We review the affected areas and discuss how you use the building and what you want the work to achieve.
Your quotation explains the proposed repairs or refurbishment, the areas included and the price.
We discuss timing, access, deliveries and protection with your site contact before work begins.
We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.
We review the completed work and provide the care information and documents included in your project.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyse site usage, assist in our marketing efforts, and for personalised advertising.
