Kingspan Insulated Metal Panel Installers in San Antonio and Austin

Kingspan Certified Installer for commercial roofs and walls

Roofing Contractors Association of Texas member

Kingspan Certified Installer

Kingspan roof and wall panels, installed by a certified crew

Total Cladding and Roofing is a Kingspan Certified Installer. We install Kingspan insulated metal panels on commercial and industrial roofs and walls in San Antonio and Austin, from new distribution buildings to the full recladding of tired metal sheds. If your drawings name a Kingspan panel, or you want a straight answer on whether insulated panels suit your building, talk to the crew that will install them.

A Kingspan insulated metal panel is a factory-made sandwich: a foamed insulation core bonded between two steel facers. The weather skin, the insulation and the interior finish arrive as one component, so a roof or wall closes in a single pass. That speed is real, but the joints, edges and openings still decide how the envelope performs, and that is where installer skill shows.

We bring 20+ years of commercial roofing experience and a European habit of designing panels, insulation, connections and weatherproofing as one system. Our Bulverde office sits about 30 minutes from central San Antonio by US 281.

Gray insulated metal roof panels with a central ridge cap and translucent skylights — TCR group project example. Insulated panel roof from the TCR group's UK project work.

Related Kingspan Installation Services

Roof, Wall, Insulation, and Cladding Services

The Kingspan panel range we install

Kingspan groups its US range into insulated panel systems, controlled environments, and architectural insulated panels and facade systems. For walls, the QuadCore KS Series is the workhorse, offered in Azteco flat, Micro-Rib, Mini-Wave, Shadowline and Vektra profiles and installed vertically or horizontally. QuadCore Optimo gives a flat architectural face, QuadCore KarrierPanel is the barrier wall panel, and KS Granitstone carries a masonry-like texture for frontages.

For roofs, KingRib comes in KingRib 3 and KingRib 5 high-rib versions with a self-aligning overlap joint, and KingSeam gives an insulated standing seam with hidden fastener clips. QuadCore Technology, a hybrid polyisocyanurate core, sits behind the KS Series wall panels. Where a project includes cold rooms or food areas, the Controlled Environments catalog, which includes CLEANsafe 120, is where we start.

Buildings where Kingspan panels earn their place

We recommend Kingspan panels when a building must hold a steady interior temperature or the owner wants the envelope finished by one trade. In San Antonio that means distribution and cross-dock buildings along I-35 toward Schertz, cold storage and food processing near Loop 410, and office frontages where a clean flat panel lifts a tired elevation. Our insulated metal panel work in San Antonio covers each of these.

Austin’s growth runs on manufacturing, tech and flex buildings in Round Rock and along SH 130. Those owners care about clean interiors, controlled temperature and fast enclosure so fit-out trades can start on time. See our insulated metal panel installation in Austin for how we plan that work.

Why insulated panels suit San Antonio and Austin heat

Central Texas summers load a building envelope hard. Long stretches of high heat and intense UV drive roof surface temperatures up, and an uninsulated metal roof passes much of that heat straight into the space below. An insulated panel puts a continuous core behind the steel facer, without the compressed blanket insulation and gaps at purlins that older metal buildings live with.

The same heat makes metal move. A long roof panel grows and shrinks every day, so we follow Kingspan’s fastening and joint details exactly and never improvise sealant at laps. Spring hail and sudden heavy rain test the roof as well. We finish each day with every opened area closed and every lap sealed, because a half-sealed joint is where water gets into an insulated panel.

How we install Kingspan panels

Survey first

We measure the structure before anything is ordered. Purlin and girt positions, slab edges, opening sizes and existing roof lines all go on the drawings, because Kingspan panels are made to length and a wrong dimension costs weeks.

Design coordination

We work through the submittal with the architect, engineer and general contractor: panel layout, clip and fastener type, joint sealant, flashings and trim. Questions get answered on paper before panels leave the factory, not on the lift.

Sequencing around operations

On an occupied building we agree access, crane positions, exclusion zones and daily close-down with your site team. We open only what we can close the same day, so stock, staff and production stay dry and protected.

Edges and openings

Most panel leaks start at a detail, not in the middle of a panel. We take extra care at eaves, ridges, corners, base angles, dock doors, louvers and roof penetrations, using Kingspan trims and the specified sealants.

KingRib or KingSeam on the roof

We recommend KingRib on long-span industrial roofs where an exposed-fastener lap is acceptable and budget leads the decision. Its self-aligning side joint keeps sealant placement consistent across a big roof. KingSeam suits low-pitch roofs with long runs: Kingspan lists it for slopes as low as 1/4 in 12 on single-panel runs, and its field-seamed joint keeps fasteners out of the weather.

Both roofs need the structure checked first. An insulated panel weighs more than a single-skin sheet, so we confirm with the project engineer that purlin spacing and capacity suit the chosen panel before anyone orders. Our insulated metal panel roofing service explains how we compare panel roofs with other options.

Kingspan walls on warehouses, plants and offices

KS Series and Optimo wall panels can use Leo-Klip, Kingspan’s concealed clip fastening system set in butyl sealant. It cuts back-fastening and keeps fastener heads off the face of the building, which matters on a frontage. On a warehouse side wall we may run a ribbed profile vertically; on an office or showroom we often set a flat profile horizontally with clean reveals.

Openings decide the finished result. Dock doors, personnel doors, windows, louvers and canopy brackets each need framing, trim and sealant that tie into the panel joint. We settle those details at submittal stage with the door and glazing trades, so nobody cuts a panel in the field to make an opening fit.

Recladding an existing metal building

Plenty of older metal buildings around both cities have single-skin walls, thin faced insulation and rust at the base. Kingspan panels can reclad those walls over the existing frame once we confirm the girts are straight, sound and spaced for the new panel. Where girts need adding or correcting, we put that in the scope rather than leave it as a surprise.

Recladding usually runs bay by bay. We strip old sheeting only as fast as new panels go up, so the building is never left open overnight. Tenants keep working, and the facility manager gets a daily plan of where the crew will be.

Kingspan data sheets and planning your project

Our Technical Library holds Kingspan product records and data sheets, from the QuadCore KS Series to KingSeam and Leo-Klip. Browse the Kingspan section of the Technical Library while you compare profiles, then send us drawings, photos and your program. We will tell you which panel we would use, why, and what we still need to price it.

Talk to a Kingspan Certified Installer

Call (210) 775-0995 or email info@totalcladdingandroofing.com with your drawings, photos and dates. We survey sites in San Antonio and Austin and price Kingspan roof and wall panels from what we measure.

Frequently asked questions

Kingspan Insulated Metal Panel Installers in San Antonio and Austin FAQs

Is Total Cladding and Roofing a Kingspan Certified Installer?

Yes. We are a Kingspan Certified Installer for insulated metal roof and wall panels. We install Kingspan panels on commercial and industrial buildings in San Antonio and Austin, working from the approved submittal and Kingspan's published details for the panel on your project.

Which Kingspan panels do you install?

We install Kingspan wall panels such as the QuadCore KS Series, Optimo, KarrierPanel and KS Granitstone, and roof panels including KingRib and KingSeam. The right panel depends on the building's use, the roof pitch, the look you want and the structure that will carry it.

Can you install Kingspan panels while our building stays open?

Yes. We agree work areas, access and crane positions with your site team, open only what we can close the same day, and protect stock and equipment below. Most distribution and manufacturing operations keep running when the work is phased this way.

Should we choose Kingspan panels or a metal roof with separate insulation?

Choose insulated panels when you need steady interior temperatures, a clean interior face or fast enclosure. A single-skin metal roof with separate insulation can cost less up front on a simple storage shed. When the choice is close, we price both so you can compare.

Do you install Kingspan panels on cold storage buildings?

Yes, once the design team has set the temperature, vapor control and hygiene requirements. Cold storage needs tight joint sealing and careful detailing at floors, ceilings and penetrations, and we work from Kingspan's Controlled Environments details for those areas.

How far is your office from our site?

Our office is in Bulverde. Typical drive times are about 30 minutes to central San Antonio via US 281 and about an hour and 20 minutes to central Austin, so we plan crews and deliveries for both cities from one base.

What do you need to price a Kingspan panel project?

Send the address, drawings or a dimensioned sketch, the Kingspan panel named in the specification if there is one, photos of the existing building and your target dates. A site survey follows before we fix the price.

Can new Kingspan panels match our existing building for an extension?

Often, but we check first. We record the existing profile, thickness, module width and color, then confirm current availability with Kingspan before we promise a match. If the exact panel is no longer made, we propose a clean transition detail instead.

We searched for Kingspan installers near me from Round Rock. Do you cover it?

Yes. Round Rock is part of our Austin area work. We survey every site in person, plan the installation around your operations and supervise the crew on site from the first panel to the last trim.

Do Kingspan panels help a building stay cooler in summer?

They help. The continuous insulated core cuts the heat passing through roof and walls, and a light exterior color reduces the heat the steel facer absorbs. We do not quote energy savings; your engineer can model the building if you need figures.

UK refurbishment experience, a Texas office

Metal roof retrofit

A new metal roof above a suitable existing covering, with subframing, insulation and details considered together.

TPO roofing

New TPO roof systems, TPO roof replacement and TPO recover for warehouses, retail, offices and industrial buildings.

R-panel and insulated panels

R-panel roofing and wall cladding, and insulated metal panels for roofs and walls on new builds and refurbishments.

Protective metal coatings

Preparation, rust and cut-edge treatment, and compatible protective finishes for metal roofs and cladding.

Roofing and cladding systems

Roofing systems and materials for Texas facilities

Tell us about the building

Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.

Arrange a site visit

We review the affected areas and discuss how you use the building and what you want the work to achieve.

Review the quotation

Your quotation explains the proposed metal roof or cladding work, the areas included and the price.

Agree the work plan

We discuss timing, access, deliveries and protection with your site contact before work begins.

Complete the work

We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.

Handover

We review the completed work and provide the care information and documents included in your project.