Commercial Roof Repair Options in Texas

Investigate leaks and repair damaged details on an otherwise sound commercial roof.

Commercial roof repair

Repair the problem and retain the sound roof

A recurring leak does not automatically mean the whole roof needs replacing. We investigate the affected area and explain the repair needed to connect it back to sound roofing.

Tell us where water appears, when it happens and whether previous repairs have helped. That history can be as useful as the mark visible on the roof.

Cut edge treatment

Repairs for different roof materials

The existing materials determine the repair and connection details.

Metal roof repairs

We check fasteners, laps, seams and flashings. Damaged sheets may need replacing; severely corroded metal cannot be made sound with sealant.

TPO and PVC repairs

Punctures and failed welded details need repairs compatible with the membrane already installed. We identify the material and check the surrounding roof before patching.

EPDM repairs

Rubber membrane repairs often involve seams, flashings or punctures. The surface needs preparation that allows the repair materials to bond.

Modified bitumen repairs

Open laps, splits and damaged flashings need attention before a new protective coating is considered.

Built-up roof repairs

A repair needs to address the damaged plies and any wet material underneath, rather than just covering the surface defect.

Coated roof repairs

We identify the existing coating and the defect below it before selecting compatible repair materials.

What we look at around the leak

The entry point

Water can travel before appearing indoors. We inspect nearby connections as well as the area above the stain.

Earlier repairs

Repeated patches can hide the original defect. Let us know which repairs have already been attempted.

The roof beneath the surface

Trapped moisture or damage below the covering can require a wider repair than the visible opening suggests.

The occupied space below

We agree access and any protection needed for stock, equipment or people beneath the work.

A documented sequence

How we approach a roof repair

  1. Discuss the leak and the areas affected.
  2. Inspect the roof and identify any further investigation needed.
  3. Explain the proposed repair and provide a quotation.
  4. Agree access and protection before completing the work.
  5. Record the repair and explain any remaining areas needing attention.

Get help with a leaking roof

Contact our Texas office with the address and a description of the problem. Photographs taken safely from inside or from the ground are helpful.

Discuss your project with us.

Frequently asked questions

Commercial Roof Repair Options FAQs

Can you help before we know which roofing service we need?

Yes. Describe the property and concern. A condition review can help determine whether the next step is repair, restoration or a larger project.

Does an old commercial roof always need replacement?

No. Condition, moisture and the extent of defects matter more than age alone.

Do you work on metal and low-slope roofs?

Yes. The existing system is identified so repair products, connections and replacement options can be assessed appropriately.

How is restoration different from replacement?

Restoration retains a suitable roof after repairs and treatment. Replacement removes existing roofing to install a new assembly.

Can a new roof be installed over the old one?

Sometimes, as a recover. Retained layers, moisture, structural capacity, attachment and clearances need assessment first.

Can our business stay open during roof work?

Often, but access, protection and interruptions depend on the work and the use of the space below.

Why can similar-sized roofs have different prices?

Removal, height, access, insulation, roof details and concealed damage can change the work substantially.

Can you quote from drawings?

Yes, where they define the work adequately. Existing buildings may still need a site review to confirm dimensions and condition.

Can the work be coordinated with our other contractors?

Roofing can be planned alongside equipment and building work. Share the relevant drawings and schedule before roof details are finalized.

What is the first step?

Send the address and current roof concern or planned project. State whether you need an inspection, initial budget or defined installation quotation.

UK refurbishment experience, a Texas office

Refurbishment specialists

Our business grew through roof and cladding refurbishment in the UK. That experience shapes the work we now offer from our Texas office.

Repair what can be retained

We investigate the roof problem and explain what can be repaired, restored or replaced, so you can decide how to invest in the building.

Roofing and cladding together

We can coordinate roof, insulation, wall panel and drainage work, including the connections where separate repairs can leave problems behind.

A plan for your working building

We agree access, work areas and protection with your site team, including any restrictions needed while the roof is opened.

Roofing and cladding systems

Roofing systems and materials for Texas facilities

Rustoleum Logo
Sika Logo
Kingspan Logo
Morin Logo
American WeatherStar Logo
GAF Logo
TAMKO Logo
PAC-CLAD Logo
1

Tell us about the building

Start with the address and the roof or cladding problem. Photographs are helpful if you already have them.

2

Arrange a site visit

We review the affected areas and discuss how you use the building and what you want the work to achieve.

3

Review the quotation

Your quotation explains the proposed repairs or refurbishment, the areas included and the price.

4

Agree the work plan

We discuss timing, access, deliveries and protection with your site contact before work begins.

5

Complete the work

We carry out the agreed work and discuss any changes needed if opening the roof reveals additional damage.

6

Handover

We review the completed work and provide the care information and documents included in your project.