Home »
Silicone Coatings for Warehouse and Industrial Roofs in San Antonio and Austin
Silicone Protection for Low-Slope Metal Roofs on Warehouses and Industrial Buildings
Silicone roof coatings stand up to strong UV and to water that lingers after rain, which makes them a strong choice for low-slope metal roofs on warehouses, distribution centers and industrial buildings in San Antonio and Austin. We apply silicone as part of a complete metal roof coating system designed to:
-
Resist water that sits at end laps and low spots after heavy rain
-
Shield the metal from the UV that chalks and breaks down factory paint
-
Renew a worn roof surface with no tear-off while the building keeps running
Why Silicone Roof Coatings?
Warehouse roofs around San Antonio and Austin bake through long summers, take spring hail and get hit by sudden downpours. Silicone handles sun and standing water better than most coatings, offering:
-
Superior Water Resistance: Silicone repels water and isn’t degraded by standing water—unlike acrylics
-
UV & Weather Durability: Resistant to color fading, chalking, and weather abrasion
-
Flexible & Elastic: Expands and contracts with the roof substrate, preventing cracks
-
Reflective Finish: A white silicone surface runs cooler than faded metal in the sun, though it holds dirt and dulls unless it is washed
-
Protection for Sound Metal — Silicone protects panels that are still structurally sound. It cannot restore steel that has rusted through, so perforated panels are replaced before we coat.
Where Silicone Fits on San Antonio and Austin Buildings
-
Low-Slope Metal Roofs where water lingers at end laps and gutters after rain
-
Weathered R-Panel and Standing Seam Roofs on distribution centers from the I-35 corridor to SH 130
-
Working Warehouses and Plants where a tear-off would stop operations
If your metal roof leaks at laps and fasteners but the panels are sound, silicone over properly treated details is a strong alternative to a new roof. If the roof is a flat membrane that is wet or worn out, we recommend a TPO recover instead, and where the metal has rusted through, a metal roof retrofit.
Our Silicone Coating Process
-
Initial Roof Assessment
-
Inspect for leaks, rust, ponding and loose or stripped fasteners
-
-
Comprehensive Preparation
-
Clean, dry, and remove debris
-
Pressure wash and treat for mold or grease
-
Replace perforated panels and seal laps, seams and fasteners
-
-
Priming for Adhesion
-
Apply the primer the system specifies, including rust-inhibitive primer on treated metal
-
-
Silicone Coating Application
-
Spray or roll the silicone to the dry film thickness the system specifies
-
Embed reinforcing fabric in seams or high-stress zones
-
-
Topcoat for Reflectivity
-
Add a white reflective silicone topcoat to reduce heat gain
-
-
Final Inspection & Handover
-
Check coverage and thickness across every roof section
-
Hand over the product data, scope and thickness readings
-
Benefits of Partnering with Us
Built for Central Texas Conditions – Systems chosen for months of high heat and strong UV
Certified Installer – American WeatherStar and Sika systems, applied to each manufacturer’s method
Minimal Business Impact – No tear-off, and we work in sections around docks, stock and rooftop units
Less Waste – The existing roof stays in place instead of going to landfill
Close to Both Cities – Bulverde sits a typical 30-minute drive north of central San Antonio, with central Austin about an hour and 20 minutes away
Who Should Consider Silicone Coatings?
-
Facility managers of warehouses, distribution centers and manufacturing plants
-
Owners of low-slope metal roofs where water sits at laps after rain
-
Operators who cannot shut down for a tear-off
-
Businesses with a sound metal roof that is not yet ready for replacement
Book a Silicone Coating Survey
If your warehouse or plant roof shows chalked paint, rust at the laps or leaks at fasteners, we will survey it and say plainly whether silicone, another coating or a retrofit is the right answer. The commercial roof coatings in San Antonio and commercial roof coatings in Austin pages cover the buildings we see in each city.
Request a survey and quote for a silicone coating system specified for your roof.
Call (210) 775-0995 or send a request through our contact form.
Total Cladding and Roofing – Silicone Roof Coatings in San Antonio and Austin
To upload drawings, specs and plans please go to the form on our contact page.
Get in Touch