Revision context
Document record
The application guideline describes how to apply the Color-Gard+ roof restoration system over metal roof surfaces. It is a five-page PDF with a last revision date of 04/14/26. The document states that the system is based on the MET-A-GARD+ system, with a High-Gloss Acrylic 215 top coat added for color fade protection.
Part 1 sets out the general scope, the requirement that one approved applicator perform the work, and a note that penetrations, drains and flashings are outlined separately. Part 2 lists the coatings and related materials with type, viscosity, elongation, tensile strength, volume solids and color. The products are High-Tensile Acrylic 211, High-Gloss Acrylic 215, Red Oxide Rust Prime 912, Terminator 622 sealant and EcoCleaner 925 surface cleaner. Delivery, storage and warranty conditions follow.
The warranty section covers a ten-year color fade warranty, the gasketed threaded fastener requirement for an NDL warranty, and the fastener and wood substrate exclusions. Part 3 covers installation, starting with surface preparation: an adhesion test, a 90-day cure for new galvanized metal or an approved surface conditioner, a check for rust under the panels, and pressure washing at a minimum of 3,000 psi. Primer application is the next section in the extracted text.
Material changes / notes
Official manufacturer document matched through the system page document filters. Confirm its revision and applicability at source before use.