Revision context
Document record
This one-page product data sheet covers High-Solids Silicone 412, a ready-to-use, high-solids, single-component, moisture-cure silicone coating. The sheet lists it for Ure-A-Sil, Ure-A-Sil Eco, Envir-O-Sil, Max-Ply, Met-A-Sil and Foam-Gard, and the number PDS-121025 is printed at the top.
The sheet describes the coating as the standard specification for liquid-applied silicone used in spray polyurethane foam roofing, single-ply restoration, and top coating of several systems. It lists 92% solids and low VOCs. Installation notes cover mixing without an electric mixer, surface preparation, and application by spray, brush or roller without thinning, with a 40°F minimum application temperature.
The technical data lists 92% plus or minus 2 solids by volume, 250% plus or minus 25% elongation, and 330 plus or minus 50 psi tensile strength. It gives a 290°F COC flash point, a Shore A hardness of 50 plus or minus 5, an initial reflectivity of .87 and initial emissivity of .89. VOCs are under 50 grams per liter, drying time is 1 to 4 hours, shelf life is 24 months, and the service range is -40°F to 350°F. Packaging is 5 and 50 gallon containers, and standard colors are white, gray and tan.
Material changes / notes
Official manufacturer document matched through the system page document filters. Confirm its revision and applicability at source before use.