Technical document revision

Non-Woven Polyester Fabric

StatusCurrent
Last verifiedSeptember 20, 2026

Revision context

Document record

This one-page product data sheet covers Polyester Fabric, a textile made of 100% polyester staple fibers that are hydraulically entangled. It is listed for Ure-A-Sil, Envir-O-Sil, Ure-A-Max, Met-A-Gard, Met-A-Gard+ and Met-A-Sil, and the number PDS-050621 is printed at the top.

The sheet names cutback asphalt, asphalt emulsion, elastomeric asphalt and acrylic coatings as cold process coatings used with the fabric. Installation uses Fabric Bond 930 or another American WeatherStar base coat: a layer of coating is applied, the fabric is laid into the wet coating, and a second layer goes on top once the first sets up. The sheet describes the fabric as non-raveling, resistant to chemicals and solvents, and able to keep its physical properties when wet.

The technical data lists 100% elongation, 35 psi tensile strength, a weight of 11 pounds per square, and 22 mils of bulk. Widths available are 36, 20, 12, 6, 4 and 2 inches.

Material changes / notes

Official manufacturer document matched through the system page document filters. Confirm its revision and applicability at source before use.

Applicability

Related products

Current Code: Ure-A-Sil

Ure-A-Sil

Ure-A-Sil roof restoration system combines urethane and silicone technologies to deliver unmatched UV stability, reflectivity, durability, and long-lasting waterproof protection for flat roofs.

Family: Commercial roof coating system

View permanent product record
Current Code: Envir-O-Sil

Envir-O-Sil

Envir-O-Sil roof restoration system uses low-VOC, high-solids silicone coatings to deliver superior UV protection, weatherability, and eco-friendly performance on various substrates.

Family: Commercial roof coating system

View permanent product record
Current Code: Ure-A-Max

Ure-A-Max

Ure-A-Max roof restoration system is a hybrid urethane solution delivering superior durability, UV resistance, and chemical protection for flat and low-slope commercial roofs.

Family: Commercial roof coating system

View permanent product record
Current Code: Met-A-Gard

Met-A-Gard

Met-A-Gard roof restoration system features advanced acrylic coatings with superior elongation, tensile strength, and durability for commercial and industrial metal roof restoration.

Family: Commercial roof coating system

View permanent product record
Current Code: Met-A-Gard+

Met-A-Gard+

Met-A-Gard+ roof restoration system uses advanced high-tensile acrylic coatings for superior protection, color retention, and flexibility on commercial and industrial metal roofs.

Family: Commercial roof coating system

View permanent product record
Current Code: Met-A-Sil

Met-A-Sil

Met-A-Sil roof restoration system uses high-solids silicone coatings to deliver exceptional UV protection, reflectivity, weatherability, and performance for metal roof restoration.

Family: Commercial roof coating system

View permanent product record

Provenance

Archive and verification record

First discovered
September 20, 2026
Last verified
September 20, 2026

View the original manufacturer source

Report incorrect or outdated information