Revision context
Document record
This one-page data sheet covers Terminator 622, a 100% solids, moisture-cure sealant and adhesive for industrial use. The sheet is numbered PDS-041521. It describes the product as self-leveling for seams, fasteners, ridge caps, flashings and penetrations, and as applicable to surfaces at or below freezing once frost is removed.
The technical data lists 500% elongation, 200 psi tensile strength, a hardness of 25 after a five-day ambient cure and a low temperature flex of -20°F. The service temperature range is -40°F to 200°F, and the minimum application temperature is 32°F. Dry time is 2 to 12 hours. The white product is sold in 10.3-ounce tubes and 2-gallon pails, and the sheet states that it is UV stable for up to 5 years.
Surface preparation requires cleaning, and any loosely adhered coating must be removed before application. The sheet lists a synthetic bristle brush and 28 fluid ounce caulk gun cartridges as application tools. Bonding substrates named are steel, aluminum, modified bitumen, built-up roofing, spray foam, styrofoam, EPS, glass, wood, fiberglass, concrete and coated metals.
Material changes / notes
Official manufacturer document matched through the system page document filters. Confirm its revision and applicability at source before use.