Revision context
Document record
This two-page technical data sheet covers TS-505 TopShot EDGE, an elastomeric acrylic topcoat marked revised January 2025. The product coverage listed is acrylic systems over metal, modified bitumen, gravel BUR, TPO, and PVC and EPDM.
Listed properties include tear resistance of 105 lbs/in, Shore A hardness of 65, VOC below 50 g/L, and a cure time of 24 to 48 hours at 77 degrees F and 50% humidity. Application temperature is 50 to 100 degrees F, and service temperature for the cured film is 15 to 180 degrees F. The sheet says the product may be applied by airless spray rated at 2,000 to 3,000 psi, or by medium nap roller or brush.
Equipment is cleaned with lukewarm water and soap, then rinsed with isopropanol, acetone or Simple Green. The sheet says not to use mineral spirits, xylene, toluene, or VMP and naphtha solvents. Packaging is tote, drum, 5 and 1 gallon, with a 12-month shelf life from manufacture in unopened containers.
The sheet states a 10 to 20 year material warranty from Kool Coats, and a 10 to 20 year labor and material warranty available for a fee, both warranted solely to the original purchaser.
Material changes / notes
Use this component sheet with the complete roof-system specification. Follow the preparation, application and cure instructions for the selected substrate and coating layers.