CF Striated Wall Panel

CF Striated is a Metl-Span insulated metal wall panel with a foam core and narrow longitudinal striations on the exterior face. It is used in commercial and industrial walls in the United States.

The shallow striations make a wall read as nearly flat at a distance. Part of the insulated metal wall panels range, it uses concealed clips.

• Widths: 24 in.*, 30, 36 and 42 in.
• Thicknesses: 2, 2-1/2, 2-3/4* , 3 and 4 in.
• Non-directional embossed, horizontal: 8'-0" to 32'-0"
• Non-directional embossed, vertical: 8'-0" to 40'-0" for 24, 30 and 36 in. widths; 8'-0" to 32'-0" for 42 in.
• Unembossed, horizontal or vertical: 8'-0" to 16'-0"

* Available only from the Nevada plant.

The exterior face is G-90 galvanized or AZ-50 aluminum-zinc coated steel in 24 or 22 gauge. The interior face is the same metals in 26, 24 or 22 gauge.

• Finish systems: Fluropon, Fluropon Premier, Fluropon Classic, Flurothane, Flurothane Coastal, WeatherXL and Igloo White Polyester
• Metallic finishes can show color shift, shade variance, striations and longitudinal patterning
• Light Stone in the Tuff Cote system does not match Light Stone in the Standard SP offering
• Pricing varies by color, gauge and quantity

Panels join with an offset double tongue-and-groove, and a metal shelf extends from the joint so the panel can be face fastened. The striated panel is hung on concealed clips. Those clips remove thermal short circuits through the wall.

Values in the polyurethane (PUR) tables are for a 42 in. width at 35°F core mean temperature and are based on ASTM C518, ASTM C1363 and thermal modeling.

• 2 in.: U-factor 0.059, R-value 17.5
• 2-1/2 in.: U-factor 0.046, R-value 21.9
• 3 in.: U-factor 0.039, R-value 26.2
• 4 in.: U-factor 0.029, R-value 35.0

Load span tables are based on Allowable Stress Design. The panel is listed under MasterFormat 2012 Section 07 42 13.19.

The V6 X-Span Clip and V6 X-Span Edge Trim are listed with the panel. The panel can be combined with other Metl-Span joint profiles. PIR values are in a separate data sheet.

• Base: H-BE-01 extended trim leg, H-BE-02 overhang with drip edge, H-EB-01 flush extruded base
• Corners: H-CE-01 outside, H-CE-02 inside, H-CE-03 formed, H-CE-04 trimless inside, H-EC-01 extruded outside
• Eave, parapet and soffit: H-BE-03 wall and soffit
• Header, jamb and sill: H-EW-01, H-EW-02, H-EW-03, H-WH-01, H-WJ-01, H-WS-01
• Joints: H-JT-01 and H-JT-02 side joint, H-VJ-01 vertical joint with gasket, H-VJ-02 vertical joint with wet seal
• Vertical: C&I CF Vertical Detail Book, in PDF and CAD