Home »
EPDM Roof Coatings Texas
Reflective Coating Systems for Rubber & Single-Ply Roofs
EPDM (Ethylene Propylene Diene Monomer) roofs are common on commercial buildings due to their flexibility and durability—but they can degrade under intense heat and UV exposure. At Total Cladding and Roofing, we specialize in EPDM roof coating systems designed to restore waterproofing, extend roof life, and significantly lower rooftop temperatures.
We provide expert EPDM roof restoration services to commercial and industrial clients across Dallas, Houston, Austin, San Antonio, Fort Worth, and statewide in Texas.
Restore Your EPDM Roof with Reflective Coatings
Open seams, damaged flashings and punctures can allow water into an EPDM roof. We repair those defects and check whether the membrane and any previous treatment will accept the proposed coating.
Benefits of EPDM Roof Coatings
1. Improved Waterproofing
Our coating systems eliminate leaks by sealing over the EPDM membrane, flashings, seams, and penetrations—creating a continuous watertight barrier.
2. Lower Roof and Interior Temperatures
Solar-reflective white coatings reduce rooftop surface temperatures by up to 50°F, helping to cut down on cooling loads and air conditioning costs.
3. Extended Roof Lifespan
Restoration starts with repairing the roof. We then prepare the surface and apply the specified coating, with future inspections and recoating planned around its condition.
4. No Tear-Off Required
Most EPDM roofs can be coated directly, avoiding the cost and disruption of a full roof replacement.
5. Eligible for Renewable Warranties
Written warranty terms — We explain any warranty included in your quotation, who provides it and what maintenance it requires. The written terms set out the cover and exclusions for your project.
Compatible Single-Ply Systems We Restore
In addition to EPDM, our reflective coating systems are also ideal for:
-
TPO (Thermoplastic Polyolefin)
-
PVC (Polyvinyl Chloride)
-
Hypalon (CSPE)
-
Aged single-ply and ballasted roof membranes
Whether your facility uses black EPDM or white TPO, we’ll recommend the best system to match your goals and substrate condition.
Our EPDM Roof Coating Process
-
Detailed Roof Inspection
We assess membrane shrinkage, seam separation, UV degradation, and signs of water intrusion. -
Roof Cleaning & Prep
The roof is power-washed and primed to ensure strong coating adhesion. Old patches or damaged flashing are repaired as needed. -
Seam & Penetration Reinforcement
Critical areas such as drains, HVAC curbs, and wall junctions are reinforced with fabric or flashing-grade materials. -
Application of Reflective Top Coat
A white or light-gray elastomeric or silicone top coat is installed, forming a continuous barrier that reflects solar radiation and blocks water entry. -
Final Inspection & Warranty Option
Upon completion, we conduct a thorough inspection and issue a project report. Optional manufacturer warranties may apply.
Coating Systems We Use
We only work with premium roof coating systems engineered for EPDM restoration in high-heat, high-UV environments, including:
-
GacoFlex S2000
-
AcryLabs Elastomeric Coatings
-
GE Enduris Silicone
-
Karnak & Mule-Hide systems
-
And more, depending on your facility’s needs
We’ll specify the best solution based on your roof’s slope, usage, drainage patterns, and environmental exposure.
Serving Commercial Clients Across Texas
We provide commercial roof coating services from our Texas office. Areas covered include:
-
Dallas
-
Houston
-
Austin
-
Fort Worth
-
Arlington
-
El Paso
-
Waco
-
Midland and other regions
Checking the existing EPDM before coating
Old seam repairs and previous coatings can affect whether a new treatment will adhere. We identify the existing materials and check the membrane condition before recommending preparation and coating.
Book a Free EPDM Roof Coating Assessment
If your EPDM roof is aging, leaking, or driving up energy costs, a restoration coating could be the right solution. Our team offers free inspections, detailed reports, and customized quotes with no obligation.
To upload drawings, specs and plans please go to the form on our contact page.
Get in Touch