Shangle Ridge

Shangle Ridge is a self-sealing, two-piece asphalt shingle from CertainTeed for capping hips, ridges and rakes of shingled roofs. The name is a registered mark of CertainTeed.

It is applied only after the primary shingles are on both intersecting roof decks. Its colors are chosen to complement the main roof. Grand Manor, Carriage House, Belmont and Highland Slate are the field shingles it is made to accompany.

The base is a fiber glass mat with ceramic coated mineral granules embedded in refined, water-resistant asphalt. It is made in an Algae-Resistant version only.

The shingle has a reinforced nailing area and an adhesive strip. It is fastened with standard roofing nails. Two full layers of the accessory are applied on the ridge.

• Installed dimensions: 18 inches by 12 inches
• Weather exposure: 8 inches
• Pieces per box: 15
• Coverage per box: 10 lineal feet
• Weight per box: approximately 36 pounds

• ASTM D3018 Type I and ASTM D3462
• ASTM E108 and UL 790 Class A fire resistance
• ASTM D3161 Class F wind resistance
• UL 2218 Class 4 impact resistance
• ICC-ES Evaluation Report ESR-1389
• CSA Standard A123.5
• Miami-Dade Product Control approval and Florida State Product Approval
• Texas Department of Insurance Product Evaluation listing

Shangle Ridge is the hip and ridge accessory for the slate-profile field shingles in the residential shingle roofing range, including Grand Manor and Carriage House, and is also named for Highland Slate and Belmont.

The accessory has a limited warranty against manufacturing defects, concurrent with the warranty of the field shingle with which it is installed. The data sheet is dated 10/26. Listed warranty terms:

• Limited warranty: lifetime
• Algae-resistance warranty: 25 years
• Wind warranty: 15 years at 110 MPH