Select Shake

Select Shake is a DaVinci Roofscapes residential shake-format roof tile made in two field widths, 8 and 10 inches, each 22 inches long. It is part of the slate-look and shake-look residential roofing range.

Its rows are on the technical sheet dated 9/29/2025, which replaces 7/1/2025.

The field bundle holds 22 pieces in the 8-inch and 10-inch widths and weighs 42.5 pounds. 44 nails are required per bundle.

• Exposure of 10 inches takes 7 bundles for each square, straight only, with 3:12 pitch or greater.
• Exposure of 9 inches takes 7.8 bundles for each square, straight only, with 3:12 pitch or greater.

Both Select Shake layouts are straight coursed.

The 10-inch exposure weighs 297.5 pounds per square with 308 nails required. The 9-inch exposure weighs 331.5 pounds per square with 344 nails required. The accessory list gives 1-1/2 inch and 1-3/4 inch hot dipped galvanized ring shank coil nails (7,200 per box; 38 and 41 pounds) and 10-square rolls of Eco Chief SOLARHIDE underlayment at 54 pounds.

• Hip/Ridge one-piece hinged, per 12-inch exposure: 10 linear feet per bundle, 10 pieces, 14 pounds, 20 nails.
• Hip/Ridge two-piece, 6 inches wide, per 10-inch exposure, for pitches greater than 12:12: 8.33 linear feet per bundle, 20 pieces, 27 pounds, 40 nails.
• Starter, 12 by 12 inches, sold 20 pieces per bundle for 20 linear feet; 31 pounds and 40 nails per bundle.

No valley or solid accessory piece is listed for Select Shake.

Standard colors are Aged Cedar, Autumn, Black Oak, Blonde Cedar, Chesapeake, Mossy Cedar, Mountain, Tahoe, Timber Black and Weathered Gray. Cool Roof colors are Mountain Cool Roof, Tahoe Cool Roof and Weathered Gray Cool Roof.