Revision context
Document record
This two-page product data sheet covers the CF Architectural vertical insulated metal wall panel with a PIR foam core. The file carries a 2026 copyright line. The panels come in widths of 24, 30 and 36 inches, with 2, 2 1/2, 3 and 4 inch thicknesses. Lengths run 8 feet to 32 feet embossed and 8 feet to 16 feet unembossed, with the exterior face in G-90 or AZ-50 steel in 22 gauge and the interior face in 26, 24 and 22 gauge. The file states the panel is available only out of the company’s CAN facility.
The joint is an offset double tongue-and-groove with an extended metal shelf for positive face fastening. Reveal options go up to 1 inch in 1/4-inch increments. The panel’s U-factor is 0.057 at 2 inches, and its R-value is 17.9 at 2 inches up to 35.9 at 4 inches, with a K-factor of 0.112 BTU in per hour per square foot per degree Fahrenheit at a 35 degree mean core under ASTM C518.
The testing page lists ASTM E84 flame spread under 25, ASTM E119 one-hour rating over two layers of Type X gypsum, FM 4880, NFPA 259, NFPA 285-19, NFPA 286, CAN/ULC S101 with a 10-minute stay-in-place requirement, CAN/ULC S102, S134 and S138, ASTM E72, FM 4881, ASTM E283 and ASTM E2357 air leakage under 0.04 cfm per square foot at 1.57 psf, ASTM E331 with no leakage at 6.24 psf for 2 hours, and State of Florida product approval.
Material changes / notes
Official manufacturer resource matched through the current product page or official resource library. Confirm the revision at source before use.