Revision context
Document record
The file is a one-page PAC-CLAD spec sheet for the 1/2-in. and 7/8-in. corrugated panels, marked 7/26 in its footer. It shows both profiles with their widths and heights, nominal coverage figures for siding and roofing, materials, features and approval wording.
The sheet lists nominal widths of 39.75 in. and 44.5 in., and heights of 7/8 in. and 1/2 in. It gives nominal coverage from 34.67 in. to 42.67 in. across the two profiles, with one lapped rib for siding and two lapped ribs for roofing. Materials are .032, .040 and .050 aluminum, 24 and 22 gauge steel, and Galvalume Plus available.
Features include a 35-year non-prorated finish warranty, matching screws and rivets, closure strips, precut short lengths of 5 ft minimum, and panel lengths up to 30 ft on steel and 22 ft on aluminum. The sheet refers readers to the manufacturer’s website and factory for Florida building product approval numbers for exposed fastener panels, and notes that widths are nominal.
Material changes / notes
Official file linked from the current catalogue. No local archive copy is retained. Publication date and revision have not been verified.