Revision context
Document record
The file is a Word specification for PAC-850 Soffit, Section 07415, Preformed Aluminum Soffit Panels, Solid and Perforated, It covers a pre-finished, pre-fabricated factory manufactured aluminum soffit system from Petersen Aluminum Corporation. The soffit system is to be designed to meet Standard Building Code wind load requirements and is tested under ASTM E330, with published load tables. Panels are 12 inches wide by 1/2 inch deep, and the surface may be Full Vent, Half Vent or Solid in the specified colors.
Acceptable manufacturers named are Petersen Aluminum Corporation for PAC-850 Soffit, IMETCO of Tucker, GA for soffit panel only, and ATAS Aluminum of Allentown, PA for Wind-Lock panel only. Material is ASTM B-209 aluminum, 3105-H14 alloy and temper, with a camber of no more than 1/4 inch in 20 feet. The finish is Kynar 500 or Hylar 5000 fluorocarbon, with 37 standard finishes listed in .032 aluminum and a total dry film thickness of 0.95 to 1.25 mil. The finish warranty is 30 years from substantial completion. Trim is 10 to 12 feet long and formed by the manufacturer or an approved dealer.
Material changes / notes
Official file linked from the current catalogue. No local archive copy is retained. Publication date and revision have not been verified.