Revision context
Document record
The file is a guide specification dated December 2017 for the Precision Series metal wall tile system, supplied as a Word document. It is written as Section 07410 for metal wall tiles and covers the Precision Series cupped tile, diamond tile and flat tile, with concealed attachment and the trim, accessories, fasteners, insulation and sealants shown on the drawings.
The system description offers 24 gauge G-90 galvanized steel under ASTM A653, aluminum in .032 under ASTM B209, and stainless steel under ASTM A240. The performance section sets an air penetration of .010 or less under ASTM E-283 at 15 psf, no water penetration under ASTM E-331 at 15 psf for a 15 minute period, and no water penetration under AAMA 501 at 15 psf. It also requires negative wind uplift testing under ASTM E-330 at spans from 1 ft through 4 ft, with a Negative Wind Uplift Table and safety factors of 2.0 under the IBC and 1.65 under the US Army Corps of Engineers.
The warranty section gives a 30 year finish warranty from substantial completion for PAC-CLAD Kynar finish, excluding stainless steel and anodized finishes. Covered deterioration includes color fading of more than 5 Hunter units under ASTM D 2244, with stated variations for Award Blue, Cardinal Red, Weathered Steel and Weathered Copper, and chalking above a No. 8 rating under ASTM D 4214. The file also covers product data requirements for recycled content, and delivery, storage and handling of metal tiles.
Material changes / notes
Official file linked from the current catalogue. No local archive copy is retained. Publication date and revision have not been verified.