
Presidential Shake TL
- Manufacturer
- CertainTeed
- Product
- Presidential Shake TL
- Status
- Current
- Market
- United States
- Last verified
- September 23, 2026
Overview
Presidential Shake TL is a CertainTeed residential shingle roofing product with sculpted rustic edges, constructed from three laminated layers. The TL designation marks the three-layer build within the Presidential Shake line.
The shingle is designed to resist blow-off in winds up to 110 mph with normal installation and up to 130 mph with special installation. An algae-resistant form, Presidential Shake TL AR, helps protect against staining or discoloration caused by algae (gloeocapsa magma).
Materials and construction
Presidential Shake TL shingles have a fiber glass mat base with ceramic-coated mineral granules embedded in refined, water-resistant asphalt. The laminated pieces are bonded with an asphaltic cement and the shingles have a self-sealing adhesive applied. Colors of Presidential Shake TL vary by region.
Data sheets and technical documents
Current files
Archived files
No older reviewed revisions are archived for this product yet.
Dimensions and weight
- Overall dimensions: 14 1/4 inches by 40 inches
- Weather exposure: 4 inches
- Shingles per square (Presidential Shake TL): 90
- Approximate weight per square: 468 lb
Standards and approvals
- ASTM D3018 Type 1 and ASTM D3462
- Fire, Presidential Shake TL: ASTM E108 Class A, UL 790 Class A and CAN/ULC S107 Class A
- Wind, Presidential Shake TL: ASTM D3161 Class F and ASTM D7158 Class H
- Impact, Presidential Shake TL: UL 2218 Class 4 at time of manufacture
- ICC-ES ESR-1389 and ESR-3537
- CSA Standard A123.5
- Miami-Dade County Product Control approved, for Presidential Shake TL from the Shakopee plant only
- Florida Product Approval FL5444
- Meets TDI windstorm requirements
Slope limits and underlayment
Slopes of 4 inches per foot and greater are recommended for optimum appearance. Low-slope applications from 2:12 to less than 4:12 require WinterGuard Waterproofing Shingle Underlayment, or an equivalent meeting ASTM D1970, over the entire deck surface.
In areas where icing along the eaves can cause water to back up, WinterGuard or an equivalent is applied on all slopes. Above 21 inches per foot, Presidential Shake TL is nailed with nine nails and roofing cement spots under each tab.
Starter, hips and ridges
The two-layered starter course of Presidential Shake TL is made with Presidential Starter or an approved alternative starter system. Cedar Crest, or the enhanced high profile accessory shingle Mountain Ridge, in a like color caps the hips and ridges.
Warranty as published
Presidential Shake TL carries a lifetime or 50-year transferable limited warranty, depending on ownership and building type, against manufacturing defects for the original owner, plus 10 years of SureStart Protection. Presidential Shake TL AR shingles carry a 30-year algae resistance warranty when installed with the CertainTeed Hip and Ridge accessories named above.
Layers and installation features
The three-layer build uses Tri-Laminate technology, with a fiber glass base, a protective outer layer and color blending technology. An interlocking system holds the shingles in place in high winds, and self-sealing adhesive strips bond each course.
- NailTrak feature: marks clear nailing targets
- Algae resistance: StreakFighter technology where available
- Impact rating: UL 2218 Class 4
- Fire rating: UL Class A
- Wind: resistance up to 110 mph
The shingle simulates the look of natural wood shakes. Aged Bark is one named color.
Warranty details
- Residential: lifetime limited transferable warranty
- Group-owned or commercial: 50-year limited transferable warranty
- StreakFighter algae resistance: 30-year warranty, where available
- SureStart protection: 10 years
- Wind-resistance warranty: 15 years at 110 mph, with an upgrade to 130 mph available
- The 130 mph upgrade requires CertainTeed starter and CertainTeed hip and ridge products