
TruDefinition Duration
- Manufacturer
- Owens Corning
- Product
- TruDefinition Duration
- Status
- Current
- Market
- United States
- Last verified
- September 19, 2026
Overview
TruDefinition Duration is an architectural asphalt shingle from Owens Corning for steep-slope roofs in the United States. It is the base shingle of the Duration range and is made with SureNail Technology. It belongs to the asphalt shingle roofing family. The regional data sheet covered here is Owens Corning publication 10024195-F, printed September 2026, for the Irving and Memphis regions.
Construction
SureNail Technology is a woven fabric reinforcing strip in the nailing zone on the shingle's top surface. It overlays the two shingle layers. The nailing zone has Triple Layer Protection and a bond between the shingle layers up to 200 percent wider than standard shingles. The amount of Triple Layer Protection can vary from shingle to shingle. The shingle uses Tru-Bond, a proprietary asphalt sealant blended by Owens Corning Roofing and Asphalt, LLC.
Copper-lined granules developed by 3M are blended into the colored shingles. The shingles are algae resistant to control algae growth and discoloration.
Data sheets and technical documents
Current product files and retained historical revisions.
Current files
Archived files
No older reviewed revisions are archived for this product yet.
Size and coverage
- Size: 13-1/4 in by 39-3/8 in.
- Application exposure: 5-5/8 in.
- Shingles per bundle: not less than 20.
- Average shingle count per 3 bundles: 64.
- Average coverage per 3 bundles: 98.4 sq ft.
Colors
The TruDefinition color platform for this shingle lists these colors:
- Midnight Plum
- Harbor Blue
- Estate Gray
- Desert Rose
- Colonial Slate
- Driftwood
- Williamsburg Gray
- Terra Cotta
- Sierra Gray
- Teak
- Onyx Black
- Peppercorn
- Brownwood
- Chateau Green
- Amber
- Shasta White
Owens Corning Hip and Ridge Shingles are color matched to the shingle.
Applicable standards and codes
- ASTM D3462
- ASTM D228
- ASTM D3018 (Type 1)
- ICC-ES AC438
- ASTM D3161 (Class F wind resistance)
- ASTM D7158 (Class H wind resistance)
- ASTM E108/UL 790 (Class A fire resistance)
- UL 2218 (Class 3 impact resistance)
- FM 4473 (Class 3 impact resistance)
- PRI ER 1378E01
- Florida Product Approval
- Miami-Dade County Product Approval
The Class 3 impact rating comes from laboratory testing. Hail damage is excluded from coverage under the terms of the warranty.
Warranty terms as published
- Limited lifetime warranty for as long as the owner owns the home; 40 years on commercial projects.
- Wind resistance limited warranty up to 160 mph, which applies when Owens Corning component requirements are met and starter shingles are installed on the eaves and rakes.
- Algae resistance limited warranty of 25 years, which requires an Owens Corning Hip and Ridge product.
- TRU PROtection non-prorated limited warranty period of 10 years.
Roof system components
The Owens Corning Total Protection Roofing System groups the shingle with hip and ridge shingles, starter shingles, exhaust vents, intake vents, self-adhered ice and water barrier, synthetic underlayment and PINK Fiberglas blown-in attic insulation.