Revision context
Document record
The file is a Word guide specification titled Snap-On Copper, dated August 2024. Section 07410 applies to pre-finished, pre-fabricated standing seam roofing supplied by Petersen Aluminum Corporation. Factory formed standing seam panels are in scope; the related trades named are structural steel, steel joists and sheet metal flashing. The material is copper sheet and strip under ASTM B370, and the references include SMACNA and the Aluminum Association design manual.
The performance section covers water penetration under ASTM E283 and E331 and a Standard Building Code wind load. The applicator warranty is two years from substantial completion. The quality section requires factory produced panels only, and it lists several Petersen Aluminum Corporation plant locations for the specifier to choose. The section also covers submissions for panel profile, gauge, fasteners and sealants, delivery and storage, project conditions, and coordination with curbs and penetrations. The extracted text ends at the start of the panel design subsection.
Material changes / notes
Official file linked from the current catalogue. No local archive copy is retained. Publication date and revision have not been verified.