PAC-750 Soffit

PAC-750 Soffit is a preformed aluminum soffit panel in the PAC-CLAD range from Petersen. It is used for under-eave finishes in commercial and residential work and is roll-formed to exact lengths. Four profiles are available, in three surface versions: solid, half vented and full vented.

The panel has a nominal width of 12 inches measured on center, with a V-groove every 6 inches center to center. Its profile is 1/2 inch high. The widths are nominal. PAC-750 is the taller profile of the two PAC soffit lines that share the 12-inch width, with PAC-850 at 3/8 inch. Panel lengths vary by manufacturing plant.

The panel is roll-formed from .032 inch aluminum.

Perforation for ventilation is available on aluminum only, and the vented panels are lanced for airflow and under-eave ventilation. Nominal open air percentages for PAC-750 are:

• Half vented: 6%
• Full vented: 12%

The percentages are nominal and vary per profile.

Matching J channel is available in lengths up to 12 feet in matching colors. The finish carries a 35-year non-prorated warranty. PAC-CLAD colors are Kynar-based 70% PVDF coatings. Florida Building Product Approvals exist for PAC-CLAD soffit panels.

PAC-750 Soffit is one of the PAC-CLAD soffit panels alongside PAC-850 and the Flush and Reveal soffit. A spec sheet is published. Installation drawings on a hat channel substrate are published as PDF and CAD files for these details:

• Installation
• Corner splice
• Fascia to soffit
• Jamb
• Profile jamb

BIM files cover the PAC-CLAD material palette and the PAC-750 Soffit. A recycle statement and a LEED building points document are also published, and a weather tightness warranty is published for PAC-CLAD products. Soffit panels are one of the single-skin cladding types covered under metal wall panels, siding and soffit.