Technical document revision

WCP-HS T-272 polyester fabric technical bulletin

StatusCurrent
Revision1211a
Last verifiedSeptember 20, 2026

Revision context

Document record

The technical bulletin for WCP-HS, Western Colloid’s T-272 polyester fabric, describes a 3 ounce stitchbonded polyester fabric with a medium-soft finish. The code 1211a appears at the top of this one-page PDF. The bulletin says the fabric is used to reinforce cold process roofing systems, and in narrow widths as a reinforcement in elastomeric metal roof systems.

The bulletin describes the fabric as conforming well to cap sheet, smooth surfaces, and filled or spudded gravel. It notes that its close knit may need light brooming to embed the fabric and remove air pockets.

The bulletin lists the roll sizes as 10 square rolls at 40 by 324 inches, and 4, 6, 12 and 18 inch rolls, each 300 inches long. The properties table gives a weight of 3 ounces per square yard or 100 grams per square meter, a thickness of 0.025 inch, a tensile average of 57 lb, an elongation of 61%, a burst strength of 176 lb and a trapezoid tear strength of 16 lb, with averages in the machine and cross machine directions.

Material changes / notes

Official manufacturer document matched through the system page document filters. Confirm its revision and applicability at source before use.

Applicability

Related products

Current Code: SM-12-3G-3E — Acrylic-surfaced reinforced roof system

SM-12-3G-3E — Acrylic-surfaced reinforced roof system

Western Colloid specification SM-12-3G-3E is a recover smooth surface / cap sheet glass fiber roving reinforced – acrylic surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SM-12-3G-A — Aluminum-surfaced roof restoration system

SM-12-3G-A — Aluminum-surfaced roof restoration system

Western Colloid specification SM-12-3G-A is a recover smooth surface / cap sheet glass fiber roving reinforced – aluminum surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SM-1P-14-3G-3E — Acrylic-surfaced reinforced roof system

SM-1P-14-3G-3E — Acrylic-surfaced reinforced roof system

Western Colloid specification SM-1P-14-3G-3E is a recover smooth surface / cap sheet 1 ply polyester & glass fiber roving reinforced – acrylic surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SM-1P-14-3G-A — Aluminum-surfaced roof restoration system

SM-1P-14-3G-A — Aluminum-surfaced roof restoration system

Western Colloid specification SM-1P-14-3G-A is a recover smooth surface / cap sheet 1 ply polyester & glass fiber roving reinforced – aluminum surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SMEA-2P-14-3G-6xE — Acrylic-surfaced reinforced roof system

SMEA-2P-14-3G-6xE — Acrylic-surfaced reinforced roof system

Western Colloid specification SMEA-2P-14-3G-6xE is a recover smooth surface / cap sheet / single ply 1 ply polyester & glass fiber roving reinforced membrane & 1 ply polyester / acrylic reinforced surface. The official assembly specification identifies its substrate scope,

Family: Commercial roof coating system

View permanent product record
Current Code: GREA-2P-27-3G-6xE — Gravel-roof reinforced restoration system

GREA-2P-27-3G-6xE — Gravel-roof reinforced restoration system

Western Colloid specification GREA-2P-27-3G-6xE is a recover gravel / rough surface 1 ply polyester & glass fiber roving reinforced membrane & 1 ply polyester / acrylic reinforced surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and

Family: Commercial roof coating system

View permanent product record
Current Code: SM-1P-10-A — Aluminum-surfaced roof restoration system

SM-1P-10-A — Aluminum-surfaced roof restoration system

Western Colloid specification SM-1P-10-A is a upgrade smooth surface / cap sheet 1 ply polyester reinforced – aluminum reflective surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SM-2P-16-A — Aluminum-surfaced roof restoration system

SM-2P-16-A — Aluminum-surfaced roof restoration system

Western Colloid specification SM-2P-16-A is a recover smooth surface / cap sheet 2 ply polyester reinforced – aluminum reflective surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: GR-2P-24-XE — Gravel-roof reinforced restoration system

GR-2P-24-XE — Gravel-roof reinforced restoration system

Western Colloid specification GR-2P-24-XE is a recover gravel / rough surface 2 ply polyester reinforced membrane – embedded acrylic surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record
Current Code: SMEA-2P-6xE — Acrylic-surfaced reinforced roof system

SMEA-2P-6xE — Acrylic-surfaced reinforced roof system

Western Colloid specification SMEA-2P-6xE is a upgrade smooth surface / cap sheet / single ply 1 ply polyester / emulsion reinforced membrane & 1 ply polyester / acrylic reinforced surface. The official assembly specification identifies its substrate scope, reinforcement, component

Family: Commercial roof coating system

View permanent product record
Current Code: SMEA-3P-6xE — Acrylic-surfaced reinforced roof system

SMEA-3P-6xE — Acrylic-surfaced reinforced roof system

Western Colloid specification SMEA-3P-6xE is a upgrade smooth surface / cap sheet / single ply 2 ply polyester / emulsion reinforced membrane & 1 ply polyester / acrylic reinforced surface. The official assembly specification identifies its substrate scope, reinforcement, component

Family: Commercial roof coating system

View permanent product record
Current Code: GREA-3P-24-6xE — Gravel-roof reinforced restoration system

GREA-3P-24-6xE — Gravel-roof reinforced restoration system

Western Colloid specification GREA-3P-24-6xE is a recover gravel / rough surface 2 ply polyester reinforced membrane & 1 ply polyester / acrylic reinforced surface. The official assembly specification identifies its substrate scope, reinforcement, component sequence and installed application quantities.

Family: Commercial roof coating system

View permanent product record

Provenance

Archive and verification record

First discovered
September 20, 2026
Last verified
September 20, 2026

View the original manufacturer source

Report incorrect or outdated information