Solstice Shingle

From the Total Cladding and Roofing Technical Library

Log in to edit
CertainTeed Solstice Shingle product photograph

Solstice Shingle

Manufacturer
CertainTeed
Product
Solstice Shingle
Status
Current
Market
United States
Last verified
September 23, 2026

Overview

CertainTeed Solstice Shingle is a low-profile photovoltaic shingle for installation within an asphalt shingle roof. It belongs to CertainTeed's residential integrated solar roofing products and is rated at 70 W per shingle at standard test conditions.

The shingle is installed directly on roof sheathing with standard deck screws. Raised fastener locations and water channels are part of the shingle design. The solar shingles are laid within a field of asphalt shingles, so the array and the surrounding roof covering share one roof plane.

Dimensions and weight

The exposed area of one Solstice Shingle is 46 inches by 13-5/8 inches. One shingle weighs 12.7 pounds, which is 2.3 pounds per square foot. The minimum roof pitch is 2/12.

The tested and passed temperature range is -40 to +85 degrees C.

Data sheets and technical documents

Current

Current files

Archive

Archived files

No older reviewed revisions are archived for this product yet.

Installation and wind zones

The shingles are installed directly on roof sheathing using standard deck screws, with standard roofing practices. The wind speed rating is 110 mph, and the shingle is rated for installation in any wind zone, including Florida's high velocity hurricane zone.

The 25 year warranty covers the performance of the solar panels and the integrity of the shingles. The product SKU is prfa-498.

Cells and wiring

Each shingle carries 14 monocrystalline PERC cells connected in series, with two bypass diodes per shingle. Wiring is 12 AWG PV wire. The connectors are Renhe RHC2 on both leads.

Two lead lengths are published, measured from the junction box to the connector tip: 25.69 inches and 42.13 inches.

Electrical characteristics

The values below are given at standard test conditions of 25 degrees C, 1000 W/m2 and air mass 1.5.

  • Maximum power (Pmax): 70 W
  • Voltage at maximum power: 7.8 V
  • Current at maximum power: 9.0 A
  • Open-circuit voltage (Voc): 9.5 V
  • Short-circuit current (Isc): 9.4 A
  • Maximum system voltage: 600 V
  • Series fuse rating: 15 A
  • Temperature coefficient of Pmax: -0.34%/degree C
  • Temperature coefficient of Voc: -0.26%/degree C
  • Temperature coefficient of Isc: +0.04%/degree C
  • Normal operating cell temperature (NOCT): 53.6 degrees C
  • Active cell efficiency: 19.85%
  • PTC rating: 62.6 W

Power performance tolerance is +/- 5%. All other electrical characteristics are within +/- 10%.

Certifications and ratings

The following certifications and classifications are published for Solstice Shingle:

  • UL 61730-1,2 and CSA C22.2#61730-1,2
  • BIPV UL 7103
  • Fire certification UL 790 Class A and C
  • Wind classification ASTM D3161 Class F, 110 mph
  • Impact resistance FM4473 Class 3
  • NEC 690.12 compliant, UL 3741
  • California CEC listed
  • FBC HVHZ approved, with a Vasd of 150 mph and a Vult of 194 mph

The design load is +2400/-1600 Pa.

Warranty

CertainTeed publishes a 25 year limited power warranty, a 25 year limited workmanship warranty and a 10 year 110 mph limited wind warranty for Solstice Shingle. A linear power performance guarantee from CertainTeed is also published for the product.