Americana 16

Americana 16 is a 16-inch interlocking tile in the Legacy Collection of the terra cotta roof tile range. It has a lightly pressed bark texture and a gently rounded butt, reminiscent of weathered wood shake.

A smaller 14-inch Americana profile is also made. At 109 pieces per square, the 16-inch size uses fewer pieces than the 158 of the 14-inch size.

• Weight per square: 750 pounds
• Pieces per square: 109
• Overall size: 10 3/4 inches by 16 inches by 7/8 inch
• Exposure: 10 1/8 inches by 13 inches by 7/8 inch
• Recommended minimum slope: 3:12
• Base texture: Lightly Pressed Bark

All standard and custom colors, mists and blends are offered. The base texture is Lightly Pressed Bark.

Custom textures for Americana 16 are these.

• Battered butts
• Brushed butts
• Weathered
• Top sand

• Miami-Dade NOA No: 13-0430.08
• Miami-Dade NOA No: 23-0125.11
• State of Florida Approval No: FL 13777
• ASTM C1167 Grade 1 Roof Tile with water absorption less than 2%
• Class A fire rated
• IAPMO UES ER-452 (evaluation report IAPMO-UES_ER_0452-2026)
• Texas Department of Insurance evaluation report: rc309
• Florida Building Code evaluation report

Detached gable rakes are 16 inches long with a 13-inch exposure. The end band is 16 inches long with a 13-inch exposure, and the under eave piece is 12 inches long with a 12-inch exposure.

The rake weighs 2.8 pounds, the end band weighs 5.5 pounds and the under eave piece weighs 2.3 pounds.

Accessory pieces listed for Americana 16:

• Terminal: installed where hips and ridges intersect
• Ridge tile: covers the uppermost horizontal part of the roof
• Hip starter: installed at the bottom of the hip, also called a bullnose
• Closed ridge end: closed-end tile at the gable end of the ridge
• Hip tile: covers the external angle where two sloped planes meet

The hip and ridge trim groups listed with Americana 16 are as follows.

• V-Hip and Ridge (V-Hip Starter, V-Hip, V-Ridge, V-Closed Ridge End, V-2 Hip 1 Ridge Terminal)
• #118/#211 Hip and Ridge (#168 Hip Starter, #118 Hip Roll, #211 Ridge, #211 Closed Ridge End, #118/#211 2 Hip 1 Ridge Terminal)
• Circular Cover Hip and Ridge (CC-Hip Starter, CC-Hip, CC-Ridge, CC-Closed Ridge End, CC-2 Hip 1 Ridge Terminal, CC-Low Bump 2 Hip 1 Ridge Terminal)
• #102/#206 Hip and Ridge (#152 Hip Starter, #102 Hip Roll, #206 Ridge, #206 Closed Ridge End, #102/#206 2 Hip 1 Ridge Terminal)

The Americana 16 high bump pieces are #405 High Bump 2 Hip 1 Ridge Terminal and #406 High Bump Gable Terminal.

Americana 16 section drawings cover these conditions.

• 16-100: section at eave with under eave
• 16-101: section at side wall
• 16-102: section at head wall
• 16-103: section at rake edge with detached rake
• 16-200: section at V-hip
• 16-201: section at #118 hip
• 16-300: section at V-ridge
• 16-301: section at #211 ridge
• 16-302: section at #211 vented ridge
• 16-400: section at field cut valley

Americana 16 tiles are manufactured in the United States and carry a 75-year warranty against color fading and manufacturing defects.