Medallion I and II

Medallion I and Medallion II are snap-together architectural standing seam panels from McElroy Metal. Both use concealed fasteners and hidden clips, and a separate batten cap is installed over adjoining panels to close each seam. McElroy lists them for commercial and residential projects over solid deck.

Four pan profiles are shown: flat pan, single pencil rib, double pencil ribs and striated. The seam is a snap lock with hidden clips, and the panels are listed for roofs over solid decking.

• Medallion I: 1-inch rib height, narrower batten cap, can be curved to a minimum radius of 30 inches.
• Medallion II: 1 1/2-inch rib height, wider batten cap, not listed for curving.

Batten cap widths are not given as dimensions. The data sheet draws a separate clip and batten cap for each panel, and a separate zee closure for each.

Medallion I is the only one of the two in the McElroy curved standing seam list, alongside 138T and 238T and Maxima.

• Cover widths: 12, 16 or 18 inches
• Major rib on center: 12, 16 or 18 inches
• Minimum slope: 3:12
• Factory panel length: up to 75 feet, depending on the manufacturing facility
• Onsite forming: not offered
• Substrate: solid deck

Pan configurations are flat pan (standard), ribbed (optional) and striated (optional). The sheet draws one flat pan, two ribbed and one striated profile.

The standard panel is 24-gauge Galvalume. Finishes are Kynar 500 PVDF and Galvalume Plus, an acrylic-coated finish. Component materials are:

• Medallion I clip: 26 gauge, ASTM A792 (50 ksi)
• Medallion I batten cap: 24 gauge, ASTM A792 (50 ksi)
• Medallion II clip: 26 gauge, ASTM A792 (50 ksi)
• Medallion II batten cap: 24 gauge, ASTM A792 (50 ksi)
• Medallion I zee closure: 26 gauge, ASTM A792 (50 ksi)
• Medallion II zee closure: 26 gauge, ASTM A792 (50 ksi)

• Coatings: Kynar 500 PVDF and Galvalume Plus (acrylic-coated)
• Substrate: 24 gauge Galvalume

Listed tests and approvals are UL 263 Class A, UL 580 Class 90, UL 2218 Class 4, ASTM E1592 and Florida Product Approval.

Medallion I and II are batten-seam panels, unlike snap-lock Medallion-Lok. They are listed in the McElroy range of architectural standing seam roof panels.