Micro-Vee (MV40/MV40 with InnovaCELL™ Technology)

Micro-Vee (MV40) is an insulated metal wall panel from All Weather Insulated Panels. It is offered as MV40 and as MV40 with InnovaCELL Technology.

The panel's overlapping joint is self-aligning. It allows sealant to be applied at the panel joinery.

The panel has clean lines and a contemporary look that adds depth and dimension to a structure.

The MV40 carries an embossed wall surface as standard, with smooth finishes available on request depending on color, gauge and end use. Its standard interior paint is Imperial White. Multilayer coil coats for aggressive environments are an MV40 option alongside standard paint, and chips are on request.

The product page shows three photographs of the panel on a Northern Arizona University project dated 2009.

The manufacturer's wall range lists eleven panels: Corrugated (CW36), Mesa (DM40), Mesa (DM44), Flat (FL40), Heavy Embossed (HE40), AdobeTexture (HE40A), HR Wall (HR3-W), HR Wall (HR5-W), Interior Partition (IP44), Micro-Vee (MV40) and Striated (ST40).

Corrugated (CW36) has the same kind of joint as Micro-Vee. Its overlapping joint is self-aligning and makes sealant application at the panel joints easier.

Mesa (DM40) is the manufacturer's most popular wall panel and has sculpted depth and clean lines. Mesa (DM44) is made for the varied needs of modern industries. Interior Partition (IP44) is built for washdown areas that need frequent cleaning. Flat (FL40) is one of the most popular products for many commercial applications, and Heavy Embossed (HE40) has high inherent R-values.

Related wall panels are Mesa (DM40), Mesa (DM44) and Interior Partition (IP44). MV40 shares a uniform load span table with the FL40, HE40 and HE40A panels. It is one of the wall panels in the manufacturer's range.

The MV40 is a wall panel in the Wall category with two versions, MV40 and MV40 with InnovaCELL Technology. The joint overlaps and aligns itself, so sealant can be applied directly at the panel joinery.