RD1 Roof Deck (RD1/RD1 with InnovaCELL™ Technology)

RD1 Roof Deck is an insulated roof deck panel from All Weather Insulated Panels. It is offered as RD1 and as RD1 with InnovaCELL Technology. The panel delivers a walkable surface and a clean, washable interior, and it provides thermal and overall weather resistance in a single pass.

RD1 Roof Deck belongs to the Roof Deck category, labeled Low Slope Roof in the site navigation. The page carries a 3D model file and a gallery of 20 photographs.

The insulated roof deck is a single component. It works as the deck, the air barrier, the vapor barrier, the insulation and the coverboard. It gives a uniform walkable surface for membrane installation.

The roof assembly is completed by installing components that manage water to the drainage locations and then applying a membrane.

The interior skin is coil coated, so the decking does not need to be painted in the field. The interior can be painted virtually any color. The standard interior paint finish in the range is Imperial White.

Insulated roof deck systems use fastening patterns along the seam and the panel. These patterns provide diaphragm shear resistance without cross-bracing. Both diaphragm and non-diaphragm fastening patterns are available.

OneDek in its diaphragm form is covered by U.S. Patent 11,299,889 and Canada Patent 3,084,177.

The RD1 deck is produced in the factory from steel substrates and polyisocyanurate foam. Product photographs show the starter and end panels, panel joints, bundle handling with a forklift and removal of the InnovaCELL film.

The roof structure, including the decking, insulation, membrane and edge metal, has a single point of accountability for the weathertightness warranties and the components.

RD1 is listed under Low Slope Roof. On the manufacturer's solar pages it is shown beside the Pw-R systems as a related low slope roof product. Its description there repeats the water management and membrane step of the roof assembly.

RD1 shares load span and diaphragm shear tables with OneDek and RD1-M, and it has separate hidden clip load span tables. The same range includes OneDek, the HR Series and Standing Seam SR2. RD1 is an insulated deck in the family of insulated metal panels for roofs and walls.