Pw-R SR2 Field-Assembled, Rail-Based System

The Pw-R SR2 Field-Assembled, Rail-Based System is a photovoltaic mounting system from All Weather Insulated Panels. It is listed under the manufacturer's solar products and is assembled in the field on rails.

The design suits high and low roof slopes. The photovoltaic modules can be installed in portrait or horizontal orientation.

The system has zero roof penetration. This is the roof integrity highlight, shown alongside the energy generation and thermal performance highlights on the same page.

The assembly offers resistance to high wind loads. The page lists no load values.

High SR and SRI roof panels run at lower surface temperatures, which the page ties to PV efficiency and rear-side illumination for bifacial systems. Enhanced insulation lowers heat transfer through the roof assembly. The product page lists no individual SR or SRI values.

All Weather Insulated Panels describes itself as an innovator in the design, construction and advancement of foam composite insulated metal panels. Its Pw-R solar series improves energy efficiency through insulation.

Six brochures and one sustainability file are offered as downloads on the SR2 page. No individual specification values are printed there.

In the Solar category with the two HR systems, this SR2 rail-based system is named for SR2, the standing seam roof panel in the manufacturer's roof range. The listing marks the rail-less HR system as featured.

The Pw-R solar range also includes the HR Field-Assembled Rail-Based and Rail-Less systems. OneDek is shown as a related product. The roof beneath the SR2 system is a standing seam metal roof panel.