Perforated Aluminum

Perforated sheet and selected aluminum wall profiles for screens, partitions and enclosures. Hole pattern and open area influence appearance, airflow and light transmission.

Record scope

This page is the product-level record for Perforated Aluminum. It separates this product from similar lines, variants and generations so that specifications and data sheets can be checked against the correct identity.

• Product family: Architectural wall systems
• Recorded applications: Architectural wall systems
• Market: United States
• Manufacturer: PAC-CLAD | Petersen

Key recorded details

These values summarize reviewed manufacturer information. Use the linked source for tolerances, options, exclusions and complete assembly requirements.

• Product family: Architectural wall systems
• Profile and application requirements: Availability depends on the panel profile, aluminum thickness, hole size and spacing. Petersen states that steel is not perforated. Confirm the required open area and structural suitability for the chosen screening application.

Matched current documents

The following current files are connected directly to this product record. Older revisions remain in the archive when moderators retire them.

• No current product-specific file has been matched yet. A moderator should add only a document that explicitly names this product or states that it applies to the product.

Design and specification coordination

Use these checks to connect the product record to a complete, project-specific assembly. The manufacturer documents and approved construction documents govern where they provide more specific requirements.

• Confirm the exact product configuration, dimensions, material and compatible system components.
• Coordinate substrate condition, attachment, transitions, penetrations, perimeter conditions and environmental exposure.
• Check applicable test reports, approvals and installation instructions for the complete project assembly.
• Verify storage, handling, sequencing and field-quality requirements before release for construction.
• Resolve differences between the submittal, package label and installed condition before relying on this record.

Submittal and field verification

A useful product record should allow a reviewer to trace what was specified, approved, delivered and installed. Include the following items when this product is proposed or verified.

• Use the exact product name and manufacturer identifier on the submittal; do not substitute a similar family name.
• Attach the current product data sheet and the applicable installation, safety, approval and warranty documents.
• Record selected options such as size, thickness, profile, color, finish, reinforcement and attachment method.
• Identify the tested or approved assembly and list each adjoining component needed to reproduce it.
• At delivery, compare labels and revision dates with the approved record and archive superseded files instead of overwriting them.

Selection, installation and existing-roof checks

Confirm the exact product name, generation and configuration before using any value on this page. Check the roof substrate, slope, attachment or adhesive, reinforcement, edge and penetration details, accessories, tested assembly and local approval that apply to the project. For an existing roof, compare labels, package records, original submittals and physical dimensions; appearance alone is not enough to identify a product.

Recorded applications

• Architectural wall systems

Record scope

• Product family: Architectural wall systems
• Recorded market: United States
• Product code: Perforated Aluminum

Related services and guidance

• Standing Seam Metal Roofing Texas
• Commercial Roofing Services in Texas

• Product family: Architectural wall systems (United States; Manufacturer effective date not confirmed)
• Profile and application requirements: Availability depends on the panel profile, aluminum thickness, hole size and spacing. Petersen states that steel is not perforated. Confirm the required open area and structural suitability for the chosen screening application. (United States; Manufacturer effective date not confirmed)

Profile and application requirements

Availability depends on the panel profile, aluminum thickness, hole size and spacing. Petersen states that steel is not perforated. Confirm the required open area and structural suitability for the chosen screening application.

Market: United States · Effective: Official product page checked September 7, 2026; document revision dates must be checked at source.

Verify this information with the manufacturer source

Project selection and detailing

Confirm the exact product designation, substrate, fastener or clip arrangement, movement joints and perimeter details in the project submittal. Existing panels should be measured and checked against original drawings before replacement material is ordered.

Market: United States · Effective: Official product page checked September 7, 2026; document revision dates must be checked at source.

Verify this information with the manufacturer source

1. Technical Library first verified catalogue capture (September 7, 2026)
   First verified capture of the current official product page. Website record update only; not evidence of product launch or manufacturer change.

Record the panel profile, dimensions, seam or joint shape, attachment method and any product labels. Compare these with the original submittal and the manufacturer drawings. An illustration alone does not confirm the product generation or compatibility.

Compatibility considerations

Confirm material, finish, fasteners, sealants and adjoining components as a complete assembly. Similar appearance or a shared brand does not establish interchangeability. Obtain the project-specific details before ordering repair or replacement components.

• Official PAC-CLAD Perforated Aluminum product page