Get-A-Grip Painted Rivets

Get-A-Grip painted rivets are domed head blind rivets for metal roofing, siding and trim. Rivets #43 and #44 are stainless steel in a 1/8 in body diameter. Rivets #63 and #64 have a 3/16 in body diameter. TFC supplies all stainless, all aluminum or all steel rivets. Pulling the mandrel sets the rivet from one side of the joint, so trim, flashing and panel laps are fastened without access to the back. Use them on metal roof replacement with exposed-fastener panels where trim and laps need a color-matched fastener.

The paint is chip resistant and formulated to resist fading caused by UV rays. Over 50 colors are color-matched to metal roofing and siding finishes and made in the USA. Rivets ship in bags of 250 pieces or cartons of 10,000 pieces.

• #43: 1/8 in body diameter; grip range .126 - .187 in; rivet length .337 in; head diameter .250 in; head height .040 in; drill hole #30 (.129 - .133 in)
• #44: 1/8 in body diameter; grip range .188 - .250 in; rivet length .400 in; head diameter .250 in; head height .040 in; drill hole #30 (.129 - .133 in)
• #63: 3/16 in body diameter; grip range .126 - .187 in; rivet length .337 in; head diameter .375 in; head height .060 in; drill hole #11 (.192 - .196 in)
• #64: 3/16 in body diameter; grip range .188 - .250 in; rivet length .400 in; head diameter .375 in; head height .060 in; drill hole #11 (.192 - .196 in)

• Head: domed head
• Material: stainless steel in #43 and #44; aluminum and steel rivets also supplied
• Coating: chip resistant paint, formulated to resist fading caused by UV rays
• Colors: over 50, color-matched to metal roofing and siding colors including Almond, Ash Gray, Bone White, Charcoal Gray, Classic Green, Dark Bronze, Polar White and Slate Gray
• Drill bit: high speed, 135 degree split point
• Packaging: bagged, 250 pieces; carton, 10,000 pieces
• Tools: Milwaukee M12 12 volt cordless tool kit, model M12 - 2550-22, sets 250 3/16 in stainless steel rivets or 450 1/8 in steel rivets on one full charge; Rivet King model RK-65 hand tool sets blind rivets up to 3/16 in in diameter
• Rivet strength, tensile and shear in pounds: 1/8 in stainless 600 and 520; 1/8 in aluminum 180 and 150; 3/16 in stainless 1300 and 1150; 3/16 in aluminum 700 and 440